4.7 National Restrictions
In accordance to article 10 of 2014/53/EU, we inform you that there may be national restrictions and requirements for
authorization. The requirements for any country may evolve. bintec elmeg recommends that you check with local au-
thorities for the latest status of their national regulations.
This product is supplied with antennas to meet the local regulations. Do not choose other antennas. To comply with
power limits and RF exposure requirements,the antennas used for this transmitter must be installed so that people
keep a separation distance of, at least, 25 cm.
4.8 Operating Frequency
To check the device's operating frequencies, see Appendix
WWAN Specifications
on page 33 and
WIFI Specifica-
tions
on page 33
4.9 FCC Statement
4.9.1 Federal Communications Commission Interference
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from the one the receiver is connected to.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
Authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including in-
terference that may cause undesired operation.
4.9.2 FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed
and operated leaving a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
4.9.3 Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
The FCC requires this product to be used indoors to reduce the potential for harmful interference to co-channel Mo-
bile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and/or damage this device.
bintec elmeg
4 Compliance
RM3000 Router
25
