Fig. 2:
Rear panel
The following table provides information on each connector as well as a description:
Rear panel elements
Item
Description
A
SIM Card. Slot where you can insert SIM card for the external 3G module.
B
USB. Slot where you can insert a 3G USB modem.
C
4-port Gigabit Ethernet Switch.
D
RST. Reset button. For further information on how the reset button works, please
see
RST Button
on page 13.
E
WPS (Wireless Protected Setup). This allows for easy and secure configuration of
the WiFi network parameters.
F
Wi-Fi Antenna no. 3. This connector can be used or not, depending on the Wi-Fi
card the router has.
G
Eth WAN. WAN Gigabit Ethernet.
H
On/Off switch.
I
Power source connection (PSU).
3.1.3 Side Panels
Two Wi-Fi and two 3G antenna connectors are located on each side panel:
Fig. 3:
Right hand side panel
and Fig. 4:
Left hand side panel
The connectors are as follows:
Side panel connectors
Item
Description
A
Wi-Fi antenna connectors.
B
3G antenna connectors.
3.1.4 Underside Panel
The following elements can be found on the underside panel:
bintec elmeg
3 Components and Power Supply
RM3000 Router
7
