there is connection data activity).
USB
Tricolor
Off -> system stopped.
Red -> interface is unavailable because it is installing, it
is not enabled (shutdown) or due to auto-test failure.
Amber -> idle.
• Rapid blinking. It has not registered in the network or
the quality is insufficient.
• Slow blinking. GSM connection (GPRS).
• Steady. WCDMA (UMTS / HSDPA) connection.
Blinking (green/red) -> activity/maintenance.
Wi-Fi
Bicolor
Red -> interface down.
Green -> interface up.
Blinking (green/red) -> activity/maintenance.
LAN Switch
Tricolor
Green -> connected. Blinking: connection data activity.
Red -> disconnected.
Eth WAN
Tricolor
Green -> connected. Blinking: connection data activity.
Amber -> blinking: auto-test.
Red -> disconnected.
Cell
Tricolor
Off -> system stopped.
Red -> interface is unavailable because it is installing, it’s
not enabled (shutdown) or due to auto-test failure.
Amber -> idle.
• Rapid blinking. It has not registered in the network or
the quality is insufficient.
• Slow blinking. GSM connection (GPRS).
• Steady. WCDMA (UMTS / HSDPA) connection.
Green -> connected. Blinking: connection data activity.
Coverage
(1, 2, 3, 4)
Monochrome Blue
Indicates the coverage level the internal 3G module has.
Level from 0 (all the LEDs off) to 4 (all lit up).
3.1.2 Rear Panel
The following figure shows the rear panel. Here you will find the majority of the bintec RM3000 router family con-
nectors.
3 Components and Power Supply
bintec elmeg
6
RM3000 Router
