CB (E7) 06/2018
Page 51/174
6.2
Controller settings upon start up
The window „Language selection“ enables the
language selection
, in case that it’s activated in the
“Start-up” menu. Afterwards occurs a request of the
time zone
and the
temperature unit
.
The controller will function in the
operating mode
, which was active before the last shut-down. It controls
temperature, CO
2
, O
2
(chamber with O
2
control) and humidity (chamber with active humidification) in fixed
value operating mode to the last entered values and in the program mode to the set points achieved
beforehand.
Locked operation
Provided that the user administration has been activated by the assignment of passwords for the different
authorization types, the
controller operation
is first locked after turning on the unit,
recognizable by the
closed lock icon in the header.
In the locked view the controller provides all display functions. No setting functions are available.
The setpoints are shaded (light grey) in normal display. Changing them by direct entry in the fixed value
operating mode is not possible. The functional icons for setpoint entry and program start in the footer are
without function.
After turning on the unit, user log-in is required to operate the controller (chap. 13.2)
Operation without user log-in / without password-protection
If the password function has been deactivated, after turning on the unit without user log-in there are those
controller functions available, which correspond to the highest authorization level without a password
protection. There is no lock icon in the header.
Summary of Contents for CB 170
Page 165: ...CB E7 06 2018 Page 165 174 25 9 Dimensions CB 170 Dimensions in mm...
Page 167: ...CB E7 06 2018 Page 167 174...
Page 168: ...CB E7 06 2018 Page 168 174 27 Product registration...
Page 175: ......
