60
Troubleshooting
No handset dial tone.
•
Your handset may not be registered to a base station (see section 10.1).
•
Your handset may be out of range of the base. Move closer to the base unit and
check the handset number is shown on the Status bar.
No handset ring tone.
•
The ring tone is deactivated (see section 9.2).
•
Increase the volume.
Caller ID does not work.
•
Check your subscription with your network operator.
•
If you have subscribed to high-speed Internet service (Digital Subscriber Line -
DSL) through your telephone lines, you must install a DSL filter between the base
and the telephone wall jack. The filter will prevent noise and caller ID problems
caused by DSL interference. Please contact your DSL service provider for more
information about DSL filters.
A new contact cannot be stored on handset.
•
The contacts list is full, delete an entry to free memory.
Handset has lost connection with base.
•
You are too far away, move closer to the Base.
•
Re-register the two by following the instructions (section 5.3 or 10.1).
