24
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
IPv4
LAN Port
WAN Port
IPv4 address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
IPv6
LAN Port
WAN Port
IPv6 address/prefix
Default is a link-local address and is
different from each other as MAC
address is different from one to one.
For example :
fe80:0000:0000:0000:0204:edff:fe01:
0001/64, the prefix initiates by fe80::
DHCP server function
Enabled
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
Summary of Contents for BiPAC 7800NEXL
