36
Route
Destination:
the IP address of destination network.
Gateway:
the IP address of the gateway this route uses.
Subnet Mask:
the destination subnet mask.
Flag:
show the status of the route.
L
U:
show the route is activated or enabled.
L
H (host):
destination is host not the subnet.
L
G:
show that the outside gateway is needed to forward packets in this route.
L
R:
show that the route is reinstated from dynamic routing.
L
D:
show that the route is dynamically installed by daemon or redirecting.
L
M:
show the route is modified from routing daemon or redirect.
Metric:
Display the number of hops counted as the Metric of the route.
Service:
Display the service that this route uses.
Interface:
Display the existing interface this route uses.
Summary of Contents for BiPAC 7800NEXL
