30
WAN
This table displays the information of the WAN connections, users can turn here for WAN connection
information.
Interface:
the WAN connection interface.
Description:
the description of this connection.
Type:
the protocol used by this connection.
VlanMuxld:
Show the status of the VLANMuxld, VLAN ID or disabled. If VLAN ID is -1, then
disabled is shown in this field, while if VLAN ID isn’t -1, the exact VLAN ID is shown here in this field.
Igmp:
Display the status of IGMP, disabled or enabled.
NAT:
Display the status of NAT, disabled or enabled.
Firewall:
Display the status of Firewall, disabled or enabled.
Status:
Display the status of this WAN connection.
IPv4 Address:
the WAN IPv4 Address the device obtained.
IPv6 Address:
the WAN IPv6 Address the device obtained.
Summary of Contents for BiPAC 7800NEXL
