34
Attenuation (0.1 dB):
This is estimate of average loop attenuation of signal.
Output Power (0.1 dBm):
show the output power.
Attainable Rate (Kbps) :
The sync rate you would obtain.
Rate (Kbps):
show the downstream and upstream rate in Kbps.
K (number of bytes in DMT frame):
show the number of bytes in DMT frame.
R (number of check bytes in RS code word):
show the number of check bytes in RS code word.
S (RS code word size in DMT frame):
show the RS code word size in DMT frame.
D (interleaver depth):
show the interleaver depth.
Delay (msec):
show the delay time in msec.
INP (DMT symbol):
show the DMT symbol.
Super Frames: the total number of super frames.
Super Frame Errors: the total number of super frame errors.
RS Words:
Total number of Reed-Solomon code errors.
RS Correctable Errors:
Total number of RS with correctable errors.
RS Uncorrectable Errors:
Total number of RS words with uncorrectable errors.
HEC Errors:
Total number of Header Error Checksum errors.
OCD Errors:
Total number of out-of-cell Delineation errors.
LCD Errors:
Total number of Loss of Cell Delineation.
Total Cells:
Total number of cells.
Data Cells:
Total number of data cells.
Bit Errors:
Total number of bit errors.
Total ES:
Total Number of Errored Seconds.
Total SES:
Total Number of Severely Errored Seconds.
Total UAS:
Total Number of Unavailable Seconds.
xDSL BER Test:
Click this button to start a bit Error Rate Test. The ADSL Bit Error Rate (BER) test
determines the quality of the ADSL connection. The test is done by transferring idle cells containing
a known pattern and comparing the received data with this known pattern to check for any errors.
Summary of Contents for BiPAC 7800NEXL
