manualshive.com logo in svg

Billion BiPAC 7700N, User Manual

Share
Download
Billion BiPAC 7700N User Manual Download Page 6

 

3 

Features

 

 

• Supports Multiple LAN segment for multiple network application  

• 4-port 10 / 100Mbps Ethernet switch integrated 

• High-speed Internet Access via ADSL2 / 2+; Backward Compatible with ADSL  

•  802.11n Wireless Access Point with Wi-Fi Protected Setup (WPS), Wi-Fi Protected 

Access (WPA-PSK/ WPA2-PSK) and Wired Equivalent Privacy (WEP) support 

• Wireless speed up to 300Mbps 

• Quality of Service Control for traffic prioritization management 

• SOHO Firewall security with DoS Prevention and Packet Filtering 

• Universal Plug and Play (UPnP) Compliance 

• Dynamic Domain Name System (DDNS)  

• Available Syslog 

• Supports IPTV Application

*2

 

 

ADSL Compliance

 

• Compliant with ADSL Standard 

- Full-rate ANSI T1.413 Issue 2 

- G.dmt (ITU G.992.1) 

- G.lite (ITU G.992.2) 

- G.hs (ITU G.994.1) 

• Compliant with ADSL2 Standard 

- G.dmt.bis (ITU G.992.3) 

- ADSL2 Annex M (ITU G.992.3 Annex M)  

• Compliant with ADSL2+ Standard 

- G.dmt.bis plus (ITU G.992.5) 

- ADSL2+ Annex M (ITU G.992.5 Annex M) 

 

Network Protocols and Features

 

• NAT, static routing and RIP-1 / 2 

• Universal Plug and Play (UPnP) Compliant 

• Dynamic Domain Name System (DDNS) 

• Virtual Server and DMZ 

• SNTP, DNS relay and IGMP proxy 

• IGMP snooping for video service 

• Management based-on IP protocol, port number and address 

 

 

Summary of Contents for BiPAC 7700N









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands