37
Output Power (0.1 dBm):
show the output power.
Attainable Rate (Kbps) :
The sync rate you would obtain.
Rate (Kbps):
show the downstream and upstream rate in Kbps.
Super Frames:
the total number of super frames.
Super Frame Errors:
the total number of super frame errors.
RS Words:
Total number of Reed-Solomon code errors.
RS Correctable Errors:
Total number of RS with correctable errors.
RS Uncorrectable Errors:
Total number of RS words with uncorrectable errors.
HEC Errors:
Total number of Header Error Checksum errors.
OCD Errors:
Total number of out-of-cell Delineation errors.
LCD Errors:
Total number of Loss of Cell Delineation.
Total Cells:
Total number of cells.
Data Cells:
Total number of data cells.
Bit Errors:
Total number of bit errors.
Total ES:
Total Number of Errored Seconds.
Total SES:
Total Number of Severely Errored Seconds.
Total UAS:
Total Number of Unavailable Seconds.
xDSL BER Test:
Click this button to start a bit Error Rate Test. The ADSL Bit Error Rate (BER) test
determines the quality of the ADSL connection. The test is done by transferring idle cells containing
a known pattern and comparing the received data with this known pattern to check for any errors.
Select the Tested Time(sec), press
Start
to start test.
When it is OK, the following test result window will appear. You can view the quality of ADSL
connection. Here the connection is OK.
Summary of Contents for BiPAC 7700N
