10
INSTALLATION
STEP 2: CONNECTING CABLE TO SEATPOST
7. Keep a little tension on the inner cable too, to avoid accidental
disconnection of endcap (#4) and housing (#5). Secure the post
in position
8. Hold the outer housing to the access point of your remote and
rotate your handlebar at least 90° in both directions to simulate
the desired cable length. Make a mark on the outer housing,
where
you find it the perfect length for your application.
9. Remove the post from the seattube to shorten the housing and
pull the inner cable out of the housing, too. Trim the outer
housing to length without cutting the inner cable.
10. Re-insert and secure the post into the seattube to its final
position. The Endcap (#4) has to touch the plunger (#3). Make
sure to always keep a little tension on the inner and outer
cable, so all parts stay together.
4
4
Summary of Contents for DIVINE SL
Page 1: ...MANUAL DIVINE SL RASCAL ...
