9
INSTALLATION
STEP 2: CONNECTING CABLE TO SEATPOST
1. Feed the cable housing (#5) through your frame.
2. Install the special endcap (# 4) onto the housing.
Push the housing endcap all the way onto the housing.
3. Slide the connector nut (#2) onto the inner cable (#1) and
then feed the inner cable all the way through the housing.
4. Push the plunger (#3) through the holes in the connector nut (#2).
5. Use the included installation tool (#6) to screw the connector
nut with plunger and inner cable into the bottom of the seat
post.
No more torque than hand-tight is required.
6. Insert the post to the desired ride height into the frame.
While pushing the post down into the frame, gently pull on
the front end of the outer cable housing.
1
2
4
6
5
3
Summary of Contents for DIVINE SL
Page 1: ...MANUAL DIVINE SL RASCAL ...
