11
INSTALLATION
STEP 3: INNER CABLE ADJUSTING
1. Insert the inner cable through the remote lever and insert the
cable housing into its seat. Make sure that there is no slack in
the inner cable. Tighten the pinch bolt (Triggy) or the barrel
nut (2X remote) with 2 Nm.
2. Adjust the tension with the cable tensioner on the lever,
so there is no play in the cable. If the tension is too high, it will
permanently activate the post. A low tension will cause cable
play, and the post will not reach its full speed.
3. Cut the inner cable and secure it with an end cap.
adjust cable
tension
2Nm
2Nm
Summary of Contents for DIVINE SL
Page 1: ...MANUAL DIVINE SL RASCAL ...