13
MONTAGE
SHORTENING LOWER TUBE
The DIVINE SL (
not
DIVINE SL RASCAL!) allows you to shorten
the lower tube unit by up to:
• 0-115 mm
for 80 mm travel version
• 0-95 mm
for 100 mm travel version
• 0-70 mm
for 125 mm travel
Minimum insertion length of your DIVINE SL is 80 mm, no
matter if the post is cut or not!
The factory mark for minimum
insert only applies for uncut posts.
After cutting your post, we recommend to mark a new minimum
insertion line with a distance of at least 80 mm from the end of
the cut edge. Use only proper tools to cut your post, that do not
deform inner and/or outer diameter of the lower tube. A proper
tool would be a fine and sharp metal hacksaw. Make sure to
deburr the edges after cutting.
Remove cable and attachment parts
before cutting! Use the supplied
cable assembly tool.
CAUTION: Only shorten the lower tube unit yourself
if you have sufficient expertise. Otherwise contact a
BikeYoke dealer.
cutting range =
depending on travel
CUT
NEW
MIN-INSERT
80mm
EXAMPLE:
}
cutting range
Summary of Contents for DIVINE SL
Page 1: ...MANUAL DIVINE SL RASCAL ...