Operating manual No.
057-2-6-0005-R0
Version 2018
Page 17
EN
4
Transport and handling section
4.1
Transport, handling and storage
CAUTION:
Disseminate the instructions described in this chapter to all personnel
involved in the transport and handling of the machine.
For safety reasons, the moving parts must be locked before transport.
4.2
Packaging and transport
The machine is packed for transport directly from the Manufacturer.
It is supplied with a cardboard box and two wooden sleepers (1O cm height) fixed under the lifting
platform with special screws. In addition to the lifting platform, the package also contains the
ascent ramp (Figure 4, [1]) and the wheel lock tube (Figure 4, [2]).
Figure 4
–
Lifting platform model
The machine is tested and in perfect condition.
AT CUSTOMER'S REQUEST AND IN ORDER TO AVOID DAMAGE TO THE LIFTING PLATFORM DURING TRANSPORT
AND HANDLING A WOODEN CASE PACKAGING IS ALSO AVAILABLE, WHICH HAS AN ADDITIONAL COST COMPARED
TO THE STANDARD FREE PACKAGING.
4.3
Unloading and handling
All lifting and unloading operations must be carried out in compliance with current safety
regulations.
The cardboard and wooden packagings must be lifted using a forklift truck, by inserting the forks
inside the wooden supports.
Standard packaging - cardboard box with wooden
pallet
165 kg
1
2
