Operating manual No.
057-2-6-0005-R0
Version 2018
Page 29
EN
8.4.3
Cleaning the work areas
Keep the work area clear of any material that may hinder the operations of the employees.
Keep the surrounding areas clean; in particular from oil, grease, etc. that can make the floor
slippery.
Use suitable vacuum cleaners and proper equipment.
8.5
Problems and remedies
The most common problems encountered during the work, the probable causes that determine
them and the possible remedies to be taken to eliminate them are listed below.
When implementing the suggested remedy, always follow the instructions described in the
Instructions to which the remedy refers.
Bike-Lift Europe s.r.l. will solve all the problems that cannot be eliminated by means of the
attached instructions.
The motor housing (Figure 11) that activates and moves the platform is placed at the base of the
piston.
The foot and air pumps are, on the other hand, external and for their maintenance refer to the
intended manual.
Figure 11
–
electric motor
