Bike-Lift LEB-50 LIFT, Use And Maintenance Manual

Page: 12 / 42

Operating manual No. 057-2-6-0015-R0
Version 2021
P. 12
EN
2.4 Intended use
Disseminate the instructions described in this chapter to all personnel involved
in the preparation and use of the machine.
The machine is intended for lifting bicycles for maintenance purposes, as part of the
mechanical workshops.
The machine has been designed and built for the specified use; a different use and
non-compliance with the technical parameters set by the Manufacturer may be
dangerous for the operators.
Any other use different from that indicated is to be considered as not planned and
may cause damage to the machine and Operators. It is therefore
FORBIDDEN .
The machine must always be operated by only one Operator.
The Operator must always work in proper lighting conditions and wear clothes and
protections appropriate to the task performed (typical activity of mechanical workshop).
The working position of the operator during the ascent and descent phases is in the area
around the machine at the safety distance allowed by the cable length of the control panel.
Do not try to lift bicycles weighing more than the maximum capacity of the
machine. Do not stand under the suspended bicycle.
2.5 Reasonably foreseeable misuse
Reasonably foreseeable misuse means the use of the machine in a manner different from that
indicated in the use instructions, but which may derive from the easily predictable human
behavior.
The experience of Bike-Lift EUROPE s.r.l. allows you to report beforehand the following cases
of misuse for which it is not possible to use the machine:
A) INSTALLATION
The following cases are considered a misuse:

Installing the machine outdoors or in environments whose characteristics do not
comply with the environmental technical data specified in the instructions.

Installing the machine without following the instructions provided by the
manufacturer Bike-Lift EUROPE s.r.l.