Bike-Lift LEB-50 LIFT, Use And Maintenance Manual

Page: 21 / 42

EN
Operating manual No.
057-2-6-0015-R0
Version 2021
P. 21
6 Dismantling/scrapping section
6.1 Dismantling
Follow the materials dismantling Regulations in force in the country where the machine will
be dismantled.
Here are some useful indications in case you must disassemble the machine to reassemble it
in other areas, store it or dismantle it.
6.2 Mechanical dismantling
Before proceeding with the mechanical dismantling of the machine it is necessary to
disconnect the machine from the electric mains and thoroughly clean the entire structure (see
the paragraph on
Cleaning and Maintenance ).
Before removing the machine from its housing, remove all moving parts by proceeding to the
opposite of what is described in the
Installation chapter.
For the lifting modes and the relative specific safety precautions, refer to the Transport,
Handling and Storage chapter.
6.3 Scrapping
The dismantling operations of the machine must be carried out in total safety by qualified
personnel and using the personal protective equipment (PPE).
At the end of the machine's life it is necessary to proceed to the proper dismantling of the
components by separating the parts according to their chemical nature: Dismantle the
different types of machine components in appropriate landfills.
Always comply with the Legislation in force in the Country of use.