Bike-Lift LEB-50 LIFT, Use And Maintenance Manual

Page: 15 / 42

Operating manual No. 057-2-6-0015-R0
Version 2021
P. 15
EN
Finally, we remind you that the handling, installation, use, maintenance and decommissioning
of the machine represent a source of hazard if these operations are not performed in
compliance with the requirements of this Manual or without the necessary caution and
attention required.
(More details regarding the Risk Assessment to be requested from the Manufacturer).
3.4 Operator protections
Before starting any type of work on the lift, the operator must wear
appropriate personal protective equipment (PPE), such as gloves and
safety footwear.
Always wear work clothing normally used in the mechanical workshop
activity.
3.5 Safety systems
BEFORE EACH USE, YOU MUST MAKE SURE THAT THE BICYCLE IS FIRMLY
FIXED ON THE LIFT.
During the use of the lift it is very important to pay the utmost attention to the ascent and
descent maneuvers. During the ascent/descent phase the operator is required to distance
from the lift according to the length allowed by the control panel cable.
The personnel who are not in charge of using the lift must not pass or stand in the operating
area of the machine.
The machine must always be operated by only one Operator.
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lift; Use it only to
lift objects;
Do not modify the lift;
The load must always remain firm and stable.
3.6 Pictograms
Hazard of crushing hands with the lift pole.