13
www.bikefriday.com
800-777-0258 • +1-541-687-0487
Assembly: Pocket Gnu Fork
15. Tighten Fork Legs
With the fork legs properly on the
steerer, tighten both clamp bolts
securely.
Fig. 15 Tighten fork clamp bolts.
14. Pocket Gnu Suspension Fork
If you ordered a Pocket Gnu bicycle,
the fork legs were packed in a grey
felt bag and removed from the sus-
pension steerer tube (the part that
goes through the headset bearings).
The fork legs slide up the grooved
steerer until the steerer is flush with
the bottom of the fork leg clamping
collar. Keep the fork legs roughly
aligned with the wide part of the
rubber dust sleeve.
Fig. 14 Suspension fork.
Insert end
of steerer to
bottom of
clamp.
13. Install Wheel QR
Now install the quick release
from the fork spreader on the
front wheel. Make certain
that there is only one spring
per side and that the small
end of the spring is pointing
to the center of the hub on
each side. Loosely thread on
the knurled nut for now. Put
the wheel aside again.
Fig. 13 Quick release spring and nut.
