OPERATION PROCEDURES
8
If the cutter angle is adjusted without , check
that the scale of the cutter direction is also
without . If the cutter angle is adjusted with ,
check that the scale of the cutter direction is also
with .
Adjusting the cutter angle will also change the cutter direction. (Fig. 7)
(Fig. 8)
(Fig. 9)
Scale of the
cutter direction
Scale of the cutter angle
Position of the
line marker
Cutter direction
Scale of cutter direction
Read the same value of the scale of the cutter direction with the value of the scale of the cutter angle you
set, and check that the values of the scales match each other. (Fig. 8 Example of the cutter angle set to 15°)
Using the position of the scale as the reference, adjust the cutter direction.
Scale of the cutter direction
How to check the cutter direction
2
1
2
(Fig. 7)
Cutter direction
Cutter angle
0°
10
10°
20
20°
30
30°
To check the cutter direction, follow the procedures below.
Line
marker
Angles with
Angles without