9
Since the Body Case attached with the Locating Pin holds the Adapter Case connected with the Connection Case,
it is possible to set the cutter direction to any angle and to secure it easily with (2) Side Clamping Screws. (Fig. 10)
(Fig. 10)
(Fig. 11)
Install the Setting Disk enclosed in the Angle Head (Consult the page 11 “Installation of the cutting
tool”) and loosen the (2) Side Clamping Screws a little while the Angle Head is mounted in the
machine spindle. Please be aware that if the Side Clamping Screws are loosened too much, this
allows clearance between the Body Case and the Adapter Case. (Fig. 11)
Side Clamping Screws
Adapter Case
Head Case
Connection Case
Body Case
Body Case
Adapter Case
Side Clamping Screws
Setting Disk
No clearance
Side Clamping
Screws
How to adjust the cutter direction
3
1
To adjust the cutter direction, follow the procedures below.
