2,500 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Check and adjust primary chain
5. Check and adjust the clutch
6. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD
only)
7. Check and adjust drive belt with rider on bike
8. Inspect brake pads and discs for wear
9. Inspect brake fluid reservoir level and condition
10. Inspect oil lines and brake system for leaks
11. Lubricate: brake and clutch levers - throttle and clutch cables
12. Inspect operation of throttle and enrichener controls
13. Inspect fuel valve, lines and fittings for leaks
14. Check tire pressure - inspect tire and tread for wear and damage
15. Check ignition timing
16. Check all operations of electrical equipment and switches
17. Inspect and/or replace spark plugs as needed
18. Check torque of all fasteners except engine head bolts
19. Clean tappet screen
20. Download ignition module, note settings and rev hits, forward to
Big Dog Motorcycle Customer Service
21. Clean battery connections
22. Test Ride
2,500 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Check and adjust primary chain
5. Check and adjust the clutch
6. Check and lubricate throw-out bearing and clutch rod (Bulldor, RSD
only)
7. Check and adjust drive belt with rider on bike
8. Inspect brake pads and discs for wear
9. Inspect brake fluid reservoir level and condition
10. Inspect oil lines and brake system for leaks
11. Lubricate: brake and clutch levers - throttle and clutch cables
12. Inspect operation of throttle and enrichener controls
13. Inspect fuel valve, lines and fittings for leaks
14. Check tire pressure - inspect tire and tread for wear and damage
15. Check ignition timing
16. Check all operations of electrical equipment and switches
17. Inspect and/or replace spark plugs as needed
18. Check torque of all fasteners except engine head bolts
19. Clean tappet screen
20. Download ignition module, note settings and rev hits, forward to
Big Dog Motorcycle Customer Service
21. Clean battery connections
22. Test Ride
2005 OWNER’S MANUAL
[
SERVICE & STORAGE 3.13
]
2,500 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Check and adjust primary chain
5. Check and adjust the clutch
6. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD
only)
7. Check and adjust drive belt with rider on bike
8. Inspect brake pads and discs for wear
9. Inspect brake fluid reservoir level and condition
10. Inspect oil lines and brake system for leaks
11. Lubricate: brake and clutch levers - throttle and clutch cables
12. Inspect operation of throttle and enrichener controls
13. Inspect fuel valve, lines and fittings for leaks
14. Check tire pressure - inspect tire and tread for wear and damage
15. Check ignition timing
16. Check all operations of electrical equipment and switches
17. Inspect and/or replace spark plugs as needed
18. Check torque of all fasteners except engine head bolts
19. Clean tappet screen
20. Download ignition module, note settings and rev hits, forward to
Big Dog Motorcycle Customer Service
21. Clean battery connections
22. Test Ride
2,500 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Check and adjust primary chain
5. Check and adjust the clutch
6. Check and lubricate throw-out bearing and clutch rod (Bulldor, RSD
only)
7. Check and adjust drive belt with rider on bike
8. Inspect brake pads and discs for wear
9. Inspect brake fluid reservoir level and condition
10. Inspect oil lines and brake system for leaks
11. Lubricate: brake and clutch levers - throttle and clutch cables
12. Inspect operation of throttle and enrichener controls
13. Inspect fuel valve, lines and fittings for leaks
14. Check tire pressure - inspect tire and tread for wear and damage
15. Check ignition timing
16. Check all operations of electrical equipment and switches
17. Inspect and/or replace spark plugs as needed
18. Check torque of all fasteners except engine head bolts
19. Clean tappet screen
20. Download ignition module, note settings and rev hits, forward to
Big Dog Motorcycle Customer Service
21. Clean battery connections
22. Test Ride
2005 OWNER’S MANUAL
[
SERVICE & STORAGE 3.13
]
