37
Step 17: Attach Ground Stakes
A:
Drive 2 (0318) Ground Stakes 10-1/2” into the ground at both ends of (1893) SW Ground at Rock Wall
assembly and (0369) Lower Diagonal as shown in fig. 17.1. Attach using 2 (S3) #8 x 2-1/2” Wood Screws per
ground stake. The screws must catch both the (0349) Rock Rail and the (0369) Lower Diagonal. (fig. 17.1
and 17.2)
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND
WARNING:
To prevent tipping and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging or driving stakes can be dangerous
if you do not check first for underground wiring, cables or gas lines.
Hardware
Wood Parts
4 x
#8 x 2-1/2” Wood Screw
S3
2 x
Ground Stakes 1-1/4 x 1-1/2 x 14”
0318
Fig. 17.2
0369
S3
Fig. 17.1
0349
1893
0318
10-1/2” In
Ground
Summary of Contents for F23850
