34
Step 15: Chalk Wall/Tarp Assembly
A:
On the back of the assembly, attach (0726) Panel Frame to (1891) Post using 2 (S2) #8 x 1-1/2” Wood
Screws. The top of (0726) Panel Frame is tight to the bottom of (1906) Top Front Back. (fig. 15.1 and 15.2)
B:
Loosen the top bolt in (1904) Back Divide and place the Chalk Wall Tarp in between (1904) and (1906) Top
Front Back. (fig. 15.3)
C:
Attach Chalk Wall Tarp to (1906) Top Front Back, (0726) Panel Frame, (1894) Back Floor and (1904) Back
Divide using 12 (S5) #8 x 1/2” Pan Screws (with #8 flat washer) as shown in fig. 15.3. The 3 screws on (1904)
Back Divide are attached from the inside of the assembly. (fig. 15.4)
D:
Tighten the top bolt in (1904) Back Divide.
Loosen this bolt.
Place chalk wall in between
Tighten Bolt
Hardware
2 x
#8 x 1-1/2” Wood Screw
12 x
#8 x 1/2” Wood Screw (With #8 flat washer)
S2
S5
Fig. 15.3
1891
Fig. 15.2
Fig. 15.1
1894
1906
0726
1894
1904
1906
Front
Back
#8 Flat
Washer
S5
S2
S5
Wood Parts
Inside Fort View
Fig. 15.4
1891
1904
S5
1x
Panel Frame 1 x 2 x 25-1/2”
0726
Other Parts
1 x Chalk Wall Tarp
x 9
Summary of Contents for F23850
