30
Step 12: Back Wall Assembly
Part 1
A:
Attach (1894) Back Floor to (1761) Side Joist using 2 (H3) 1/4 x 2-1/2” Hex Bolts (with lock washer, flat
washer and t-nut) and 2 (S7) #12 x 2” Pan Screws as shown in fig. 12.1.
B:
On the back side of the assembly, attach (1894) Back Floor to both (1891) Posts, with (1761) Side Joist on
the inside of the assembly, using 2 (H5) 1/4 x 4-1/2” Hex Bolts (with lock washer, flat washer and t-nut). (fig. 12.2
and 12.3)
Note that the bolt on the Monkey Bar Wall is installed from the outside of the assembly and the
bolt on the Swing Wall is installed from the inside.
C:
Attach (1904) Back Divide to (1894) Back Floor with 1 (H1) 1/4 x 1-1/2” Hex Bolt (with lock washer, flat
washer and t-nut). (fig. 12.2 and 12.3).
Wood Parts
Hardware
Notice bolt is
installed from
inside
1 x
1/4 x 1-1/2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
1/4 x 4-1/2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
1/4 x 2-1/2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
#12 x 2” Pan Screw
S7
H3
1 x
Side Joist 2 x 2 x 34-3/4”
1 x
Back Floor 5/4 x 4 x 38-1/2”
1 x
Back Divide 1 x 4 x 32-5/16”
1761
1894
1904
H1
H5
H1
1/4” Flat
Washer
1/4” Lock
Washer
1/4”
T-Nut
1761
S7
Fig. 12.1
1904
1894
H3
H5
H3
H5
1894
1891
Fig. 12.3
Fig. 12.2
Notice hole
positioned down
Notice hole
positioned down
1/4” Flat
Washer
1/4” Lock
Washer
1/4”
T-Nut
Parts removed for clarity
Summary of Contents for F23850
