BIG ASS FANS Isis, Installation Manual

Page: 10 / 60

Isis
®
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
2
What’s in the box
CAUTION: Do not remove the motor from its protective packaging prior to hanging it!
CAUTION: If you ordered multiple fans, be sure to keep the components of each fan together.
The fan is shipped in three labeled boxes. The large, square box contains the main fan unit, upper mount, wall controller, wallplate,
airfoil retainers, airfoil hardware, and winglets. A smaller box contains the airfoils. Another small box contains the extension tube.
Optional parts are shipped in separate boxes that are labeled to identify the contents. If you are missing any piece required for
installation, contact Big Ass Fans at 1-877-BIG-FANS.
Note: Dashed lines indicate internal boxes or bags within the main box. Drawings below are not to scale. All boxes are labeled to
identify the contents.
Main Box
1
Hardware
Upper Mount
Main Fan Unit
Wall Controller
Wallplate
2
Extension
Tube Box
Extension Tube &
Safety Cable
6
Airfoil Box
(10) Airfoil
1. Guy wires (if ordered) are marked and packaged separately within the main box. Brackets for guy wires are included for tubes longer than 4 ft.
2. If installing the fan on a typical lighting circuit with one basic light switch, the Limited Access Controller must be installed.
3. Safety clips and carabiners are only used when the top of the mounting structure is inaccessible.
4. Winglets are standard on Isis fans; however, airfoil tips are available as an option. If you purchased the Isis with airfoil tips, they will arrive already
installed in the airfoils.
5. Optional. The Wood Frame Mounting kit is only included if ordered.
6. 1-ft extension tubes are labeled and packaged in the main box.
(10) Winglet
4
Airfoil
Hardware
(10) Airfoil
Retainer
(2) Safety Clip &
Carabiner
3
(8) Square
Washer
Pre-Installation
Wood Frame Mounting
Brackets & Channels
Wood Frame Mounting Box 5