BIG ASS FANS Isis, Installation Manual

Page: 32 / 60

Isis
®
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
24
b
a
3. Attach airfoils (to main fan unit)
WARNING: Disconnect power to fan before installing airfoils.
Attach the 10 airfoil retainers using the Airfoil Hardware. Moving clockwise around the fan hub, position the airfoil retainers as shown.
Hole A of the retainer should be positioned over top of Hole B.
Do not tighten bolts until all airfoil retainers have been attached!
Tighten the bolts along the outside perimeter to
29 ft·lb (39.3 N·m)
using a torque wrench and a 1/2” socket. After the outer perimeter
bolts are torqued, tighten the bolts along the inner perimeter to
29 ft·lb (39.3 N·m)
.
Airfoil Hardware (BAF-Supplied):
a. (20) 5/16-18 x 5/8” GR 8 Bolt
b. (20) 5/16 Belleville Washer
Airfoil Retainer
Hole B
Hole A
After the fan is completely assembled and securely hanging from the mounting structure, peel off the protective plastic
from the bottom of the hub.
Installing Airfoils (cont.)
Belleville Washer