EN
38
3. Guide the valve unit (
20
) from above into the mount (
23
) and
fi
rmly screw on the
tapping sword (
22
) from below.
4. To save space during storage, place the tapping unit (
17
) and all accessories inside
the cooling container (
11
).
5. Store the device, the CO
2
cartridges and all accessories in a dry, cool place that is out
of the reach of children and animals.
Maintenance
PLEASE NOTE!
■
Proceed in the manner described in this chapter when replacing any expendable
parts. Do not remove any other parts of the device!
The sealing rings of the tapping sword and the CO
2
line (
30, 32
) as well as the tapping
tip (
31
) for the CO
2
cartridge are regarded as expendable parts which must regularly be
checked and replaced if necessary.
Spare parts and accessories are available to order on our website:
www.dspro.de/kundenservice
Replacing the Sealing Ring of the CO
2
Line and Tapping Tip
If when drawing beer excessive losses of CO
2
are detected, the sealing ring of the CO
2
line (
24
) must be replaced.
If a CO
2
cartridge (
26
) cannot be pierced, the tapping tip (
31
) has become blunt and
needs to be replaced.
1. If there is still a CO
2
cartridge in the device, make sure that it has been completely
emptied (see the “After Use” chapter – “Emptying the Beer Keg and CO
2
Cartridge”).
2. Fold out and unscrew the cartridge sleeve (
16
) on the inside of the lid (
14
).
3. Remove the sealing ring and if necessary the tapping tip from the mount in the lid
using a narrow
fl
at screwdriver or similar tool.
4. Insert a new tapping tip into the mount in the lid if necessary.
5. Place a new seal on the tapping tip and
fi
rmly press together both parts using an
empty (!)
CO
2
cartridge (
Picture U
).
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 38
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 38
27.10.2020 11:04:31
27.10.2020 11:04:31