37
EN
directly into the sink. If this is not possible, attach the drip tray to the device and allow
the cleaning water or cooling water to run into it.
NOTICE:
The drip tray has a capacity
of no more than 450 ml!
Universal Adapter and Fresh Keg Adapter
1. Take the respective adapter o
ff
the keg (
Picture R + S
).
2. Clean the respective adapter with warm water and a little mild detergent.
Beer Line
To clean the beer line, the cleaning balloon (
29
) which is also supplied and a vessel con-
taining warm water and possibly a special disinfecting cleaner is required.
Perform steps 5 – 15 in the “After Use” chapter – “Rinsing Through the Beer Line”.
Tapping Unit
1. Unscrew the valve unit (
20
) from the tapping sword (
22
) and remove the mount (
23
)
from the tapping sword. (
Picture T
).
2. Clean the valve unit, the mount and the tapping sword with warm water and a little
mild detergent.
Cooling Container
1. The cooling container (
11
) must be cleaned after every use, i.e. after the device is
switched o
ff
.
2. Flip open the water outlet (
7
) and allow all of the water to drain out.
3. Close the water outlet.
4. Fill the cooling container with clean water (note the
MAX
marking!) and repeat steps
1 – 2.
5. Wipe out the cooling container with a clean cloth.
Drip Tray and Drainage Grille
1. Pull the drip tray (
10
) o
ff
the device forwards.
2. Detach the drainage grille (
9
) from the drip tray.
3. Pour away the liquid from the drip tray.
4. Clean the drip tray and drainage grille with warm water and a little mild detergent.
Housing
1. Clean all the surfaces of the device with a damp cloth. If there is heavy soiling, a little
mild detergent may be used if necessary.
2. Then dry with a soft cloth.
Storage
1. Clean the device and all accessories before storing them away.
NOTICE:
All parts
must be completely dry after cleaning before the device is assembled and stored
away.
2. Remove the CO
2
cartridge (
26
) from the device before storing it away (see the
“Preparation” chapter – “Inserting / Replacing the CO
2
Cartridge”).
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 37
05581_05578_Inlay_DE-EN-FR-NL_A5_V3.indb 37
27.10.2020 11:04:31
27.10.2020 11:04:31