10
ERROR CODES
E01
Possible cable fault
Connect the wire between top controller and
bottom controller well.
E02
Burst clash
a.- Check motor wires.
b.- Check that the control board is not burned
(strong smell or smoke).
c.- Check that the voltage is correct.
E03
No speed sensor signal
Check the position or replace the speed
sensor.
E05
Possible motor overload
a.- Lubricate the belt.
b.- Check that the motor is not burned.
c.- Check that the control board is not burned.
E08
Burned control board
Change the control board.
Do not hesitate to get touch with the Technical Assistance Service if you have any
queries by phoning customer services (see last page in manual).
Summary of Contents for Bladez BZ6260
Page 2: ...2 Fig 1 Fig 2 Fig 3...
