background image

 

 

 

 

 

BT 7050Treadmill

 

 

Safety Instructions 

Do not connect the power supply before the electric treadmill is fully assembled and the motor protective cover is 

closed. Insert the plug into a power outlet with 10A safety grounding. We recommend that you use an overcurrent 

protector to ensure the safety of the treadmill and the user. 

 

1. Place the electric treadmill on a clean flat place. Do not place the electric treadmill on a thick carpet as it may affect 

the air flow under the electric treadmill. Do not use the electric treadmill near water or outdoors. The electric treadmill 

has a dedicated power cord. If it is broken, please purchase a new one from the dealer or contact us directly. 

2. For convenience of plugging, do not block the power outlet on the wall when placing the electric treadmill. 

3. Do not switch it on when someone is standing on the running belt. After the power is switched on, the running belt 

may have short pauses before starting. The user shall stand on the anti-skid plastic plates on both sides of the electric 

treadmill until the running belt operates normally. 

4. To prevent clothes from being entangled with the electric treadmill, do not wear overly-long or extra loose clothes 

during exercise. The user shall wear running shoes or fitness shoes with rubber soles. 

5. Do not remove the protective cover. If the cover has to be opened for maintenance, make sure to pull out the power 

plug first. 

6. Please keep children away from the electric treadmill when it is in operation. 

7. When using the electric treadmill for the first time, make sure to hold the handrails with your hands until you get used 

to it. 

8. As the treadmill is intended for indoor use, please do not use it outdoors. Place the treadmill where it is clean and flat, 

and prevent it from encountering moisture. Please note that the electric treadmill has its intended use; please do not 

modify it for other purposes. 

9. When placing the treadmill, make sure there is a 1-meter safety distance to the left and right sides of the treadmill (no 

obstruction within 1 m from the side handrails on both sides), and 2-m safety distance to the rear end of the treadmill 

(no obstruction within 2 m from the rear end of the levelly placed treadmill). 

10. Minors shall use the electric treadmill only in the company of adults.  

11. The user shall not exceed the maximum weight of 100KG. 

12. If the electric treadmill suddenly accelerates or increases speed automatically due to problems of the electronic 

system, please pull out the safety switch immediately to stop the electric treadmill. 

   

 

 

Summary of Contents for BT7050
































Reviews: