19
BT 7050Treadmill
P10
SPEED
2 3 5 3 3 5 3 6 3 4
3
4
6
4
4
6
4
7
4
3
INCLINE
4 4 3 6 7 8 8 6 3 4
5
5
4
7
8
9
9
7
4
3
P11
SPEED
2 5 8 10 6 9 5 3 2 3
3
6
9 10 7 10 6
4
3
2
INCLINE
1 3 5 8 1 7 6 3 2 4
2
4
6
9
2
8
7
4
3
3
P12
SPEED
2 5 5 4 4 6 4 2 3 5
3
6
6
5
5
7
5
3
4
4
INCLINE
3 5 6 7 12 9 11 11 6 4
4
6
7
8 12 10 11 11 7
3
VI. User-Defined Program:
In addition to 12 built-in programs, the system also features three user-defined programs that allow the user to make
personal settings according to his/her own needs: U1, U2, U3.
1. Settings of user-defined program:
Keep pressing the “Program” key in the standby mode until you see the user-defined program that you want to set (U1-
U3), which displays the word “User”. Press the “Mode” key to confirm and start setting, and then you can set for the
first time segment. You can set the speed by pressing “SPEED+” and “SPEED–” keys and set the incline by pressing
“” and “INCLINE-” keys, and press the “Mode” key to complete the settings for the first time segment and start
the settings for the second time segment. Please continue with the above steps until the settings for all 20 time
segments are completed. After the settings are completed, the data will be saved permanently until you reset it again.
Power failure will not cause data loss.
2. Start up of user-defined program:
A. Keep pressing the “Program” key in the standby mode until you see the user-defined program (U1-U3) that
you want to run; set the run time and press the start key;
B. After the user-defined program and run time are set, press the start key to start.
3. Introduction of user-defined program settings:
Each program will divide the exercise time into 20 segments, and the speed, incline and run time settings for all 20 time
segments must be completed before pressing the start key to start the treadmill.
VII. Body Fat Measuring Program:
1. When the treadmill has stopped, press the program key to select the body fat measuring program (FAT);
2. Press the mode key to start the body fat measuring and set the corresponding parameters (F-1: sex, F-2: age, F-3:
height, F-4: weight, F-5: measure body fat). Press the speed up and down keys to adjust the set value (F-1 ... F-4). When
the interface of F-5 measure body fat displays “---”, please hold onto the handheld heart rate plates with both hands for
5-6 seconds and it will show your body fat index.
3. After entering the body fat measuring function, F-1 will show first; enter the gender information here. The default
setting is 01: male. Press the speed up and down keys to change: 01: male, 02: female.
