BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Page 12
12
ENVIRONMENTAL PROTECTION & DISPOSAL
Recycle unwanted materials instead of disposing of them as waste. Packaging should be taken to
a recycling centre and disposed of in a manner which is compatible with the environment.
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste
Electrical and Electronic Equipment. Contact your local solid waste authority for recycling
information or give the product for disposal to BGS technic KG or to an electrical appliances
retailer.
13
WARRANTY
1. Machine warranty period is determined by the manufacturer for 24 months from the sale of
machinery buyer. Warranty period begins on the date of delivery of the machine to the purchaser,
or the possible delivery date. The warranty period does not cover expendable parts – coils.
Warranty period does not include the period from the application of a legitimate complaint until
the machine is repaired.
2. Content of the guarantee is responsible for the delivery of machines at the time of delivery, and
the warranty period will have the characteristics laid down by mandatory specifications and
standards.
3. Responsibility for defects that occur after the machine sold under warranty, consists in the
obligation of free defect removal machine supplier, or service organization authorized by the
machine.
4. Condition of warranty is that the machine is used in a manner and for the purposes for which it is
intended. Such defects are not recognized extraordinary wear and damage due to insufficient
care or neglect seemingly insignificant defects. For example, the defect cannot recognize:
a. Equipment damage due to inadequate maintenance.
b. Mechanical damage due to rough handling, etc.
5. The warranty does not cover damage due to failure to meet the obligations of the owner, his
inexperience, of impairments, failure to comply with the provisions referred to in the instructions
for use and maintenance, the use of machines for the purposes for which it is not intended,
overloading the machine, even if temporary. Maintenance and repairs must be exclusively used
by original equipment manufacturer.
6. During the warranty period are not allowed any modifications or changes to the machine, which
can affect the function of each part of the machine. Otherwise the warranty will not be
recognized.
7. Warranty claims must be applied immediately upon detection of manufacturing defects or
material defects, and that at the retailer.
8. If a warranty repair will replace the defective part, transferred ownership of the defective part to
the manufacturer.
9. Warranty service can be performed only by a trained service technician authorized by BGS
technic KG.
10. Before performing warranty repairs it is necessary to check the data of the machine – the date of
purchase, serial number, machine type. If the data are not consistent with the conditions for the
recognition of warranty repairs, for example, expiry of the warranty period, improper use of the
product contrary to the instructions for use, etc., it is not a warranty repair. In this case, all costs
associated with the repair shall be borne by the customer.
