BFI Automation 2.0GT, Original Operating Instructions

Page: 27 / 48

Transport, installation and connection
4-1
4 Transport, installation and connec-
tion
All installation and connection work may be carried out by
qualified and approved specialist staff only !
Observe the legal stipulations and adjustment instructions
of the plant operator !
4.1 Scope of delivery
•
Flame scanner 2.0GT
•
Operating instructions BA 2.0GT EN
•
Connection cable (optional)
•
Harting connector set (set) and/or complete
•
Ball flange (optional)
•
3-way-ball-valve (optional)
•
Heating insulator (optional)
•
Optical alignment device (optional)
Refer to the order papers for the exact scope of delivery
and compare with the delivery note.
Checking for completeness
Check the entire delivery for completeness against the
accompanying delivery note. Please refer to our terms of
sale and delivery otherwise.
Report any damage
After arrival of the device and accessories, notify the
shipping agent, the insurance company and BFI Automa-
tion immediately in case of any damage caused by trans-
port or inadequate packaging.
Take steps to minimise and prevent further damage.
Report the insurance case to the insurance company
without delay and transmit the full claim documents at
once in order to expedite the claims settlement (at the lat-
est in sufficient time before the expiry of any periods of
preclusion and/or limitation relating to the compensation
claims against third parties).