BFI Automation 2.0GT, Original Operating Instructions

Page: 32 / 48

Transport, installation and connection
4-6
4.6.1 Company adjustment of the flame scanner
Danger to life caused by combustion or explosion !
In case of incorrect installation or adjustment, uncon-
trolled combustion or explosions may be caused !
Observe the adjustment instructions of the plant operator !
Adjustment work may be carried out only by qualified and
approved specialist staff !
The sensitivity of the flame scanner has been factory set
to approx. 50% for each spectral range.
The optical aperture has been preset to "small aperture"
by the manufacturer, which provides sufficient adjustment
reserve for more radiation input. This aperture setting has
been approved for flame monitoring on gas turbines.