Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
25 of 32
RD096 071112
7.1
Wireless Analyser Module
The cParameters in the Wireless Analyser Module that may be updated by the user are:
Network ID
[PAN_ID]
Co-ordinator MAC address
[C_MAC_Addr_1]
Link activity timeout
[Link_timeout]
To make changes to any of these parameters the commands detailed below may be used.
7.2
Wireless PC Module
The cParameters in the Wireless Analyser Module that may be updated by the user are:
Network ID
[PAN_ID]
End device MAC addresses
[ED_MAC_Addr_x] (x = 1…8)
Link activity timeout
[Link_timeout]
To make changes to any of these parameters the commands detailed below may be used.
7.3
Arguments
7.3.1 PAN_ID
The user command for changing the overall network ID shall have the following format:
PAN_ID <ddddd>
<ddddd>
– 16 bit decimal value for PAN ID setting
eg: PAN_ID 56994
Result: PAN_ID is set to DEA2 (hex)
Typing the PAN_ID command with no argument shall report the current PAN_ID setting.
7.3.2 ED_MAC_Addr [n] / C_MAC_Addr 1
The user command for changing the end device MAC addresses held within the cParameter table shall have to
following format:
ED_MAC_Addr [n] <ddddd> <ddddd> <ddddd> <ddddd>
Or
C_MAC_Addr 1 <ddddd> <ddddd> <ddddd> <ddddd>
n
– ED_MAC address to change n = 1..8 (Wireless PC Module)
<ddddd>
– 16 bit decimal values for MAC address settings, most significant word first
eg: ED_MAC_Addr 3 21 39096 10 52171
Result: ED_MAC_Addr 3 is set to 0015-8D00-000A-CBCB (hex)
Typing the ED_MAC_Addr command with only the MAC address number argument [n] shall report the current
setting of the specified ED_MAC_Addr.
Typing the C_MAC_Addr command with only the first argument [1] shall report the current setting of
C_MAC_Addr 1.
