Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
11 of 32
RD096 071112
5.4
Mini Analyser battery
The Wireless Mini Analyser will arrive with a rechargeable battery and detachable antenna placed within the battery
compartment as can be seen in the above image. The battery is of the PP3 type and should always be replaced with
one of the same type. Failure to do so may affect the performance of the device.
The battery will have a plastic terminal cover or rubber grommet attached to it.
The terminal cover should always be placed on the battery when it is not being used.
The battery may contain charge but it is advised that the battery is placed into the battery charger supplied and left
until fully charged (Green LED illuminates).
Once the battery is fully charged and ready to be used, connect the battery to the battery snap ensuring the correct
polarity is observed.
To return the battery compartment
lid, simply push down until the
release button clicks back into place
Correct battery installation.
Battery snap polarity
Batteries should be disposed in accordance with local waste regulations.
Do not incinerate
.
To remove the battery compartment lid
Press the release clip and lift away.
The battery and antenna can be found stored
within the battery compartment.
It is advised that the battery terminal cover is placed onto the battery during transit to avoid
shorting of terminals.
-
+
PUSH
PRESS
LIFT