Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
15 of 32
RD096 071112
5.6.3 Status Information
Both the Wireless PC Module and Wireless Analyser Module have 2 LEDs that are used for indicating the status to
the user. The red LED pertains to power while the orange LED relates to wireless link status.
5.6.3.1 Power LED
The power LED has three modes of operation:
Continuously on
: Power on, unit initialising
Blink
: Power on, initialisation completed ok, operating normally (0.3s on
– 2.7s off)
Off
: No power
5.6.3.2 Link LED
The link LED has four modes of operation:
Fast flash
: Initialising link, searching for device to pair with (0.5s on
– 0.5s off)
Double blink
: Link established and operating correctly (0.2s on
– 0.2s off – 0.2s on – 1.4s off)
Blink
: cParameter edit mode, no wireless activity (0.3s on
– 1.7s off)
5.7
Analyser Overview
5.7.1 Power Button
The Power Button is used to power on and off the Wireless Mini Analyser unit. With the unit powered off, pressing
and holding the Power Button will cause the unit to turn on. Upon power on the unit will display a number of
information splash screens, before displaying the main Sensor Assignment screen. The Current battery status will
be shown as part of the power on sequence, so that the user can verify the unit is suitably charged prior to use.
The unit is powered off by pressing and holding the Power Button for longer than 2 seconds.
5.7.2 Position Assignment Keys
The position assignment keys provide the operator with the means to associate a wheel sensor with a given location
on the vehicle. For the Wireless Mini Analyser, the Position Assignment Keys are the only functional keys.
5.8
Connectivity Set Up
The Wireless Analyser set-up provides a point-to-point link between a single End Device (Wireless Mini Analyser)
and a single Co-ordinator (Wireless PC Module). In order that units may automatically connect at power on devices
contain details of the units to which they may connect. Each end device is configured with the MAC address of a
single co-ordinator node, whilst co-ordinator nodes contain a list of up to 8 allowable end devices.
20 Character x 4 Line
LCD Display
RS232 Interface
(9-way D)
Antenna Connector
Position Assignment
Keys
Power Button
Tx / Rx LED
Charge Connector
