Bexen REANIBEX 300, User Manual, Page: 63 / 102

DIH 0300 B – USER GUIDE REANIBEX 300 49
8 CONFIGURATION
3. Select and open the “EQUIPMENT INFORMATION” option:
Figure 32: Equipment information screen
The information displayed on the screen:
o
Model : This indicates the equipment model.
o
Serial Number : The serial number of the equipment assigned during manufacture.
o
Equipment ID : This is the IDENTIFIER of the equipment, which can be modified by the user
(See Section “7.5.1 EQUIPMENT INFORMATION” ).
o
Manufacture Date : This indicates the date on which the equipment was manufactured.
o
Battery information : This indicates the value of various battery settings.
o
Last Session : The last date on which the equipment was used in an operating mode on a
patient.
o
Last Shock : The last date on which a defibrillation shock was delivered.
o
Last HW Test: The last date on which a Hardware Test was performed by the user in the
Configuration mode (See Section “7.7 Tests” ).
o
Last Auto Test : The last date on which an autotest was performed by the equipment.
4. After viewing the equipment information, exit this menu option using the key .
8.5.2 LATEST TEST RESULTS
The REANIBEX 300 has the option of viewing the date, time and results of the last Auto Tests performed
by the equipment. To view this information:
1. Switch on the REANIBEX 300 in Configuration mode.
2. Use the programmable buttons to access the “EQUIPMENT INFORMATION” option .
3. Select and open the “LATEST TEST RESULTS” option:
4. A screen will appear with the latest tests performed by the equipment. Each test will include test
date and time, test type (TEST) and test result.