BeWAN AP54, User Manual, Page: 15 / 40

BeWAN Wi-Fi AP54 15
It is particularly important to make a careful note of the result obtained, to be able to configure
your Wireless cards or another Access Point. Activate WEP on each card or Access Point, then
enter the key entered into the BeWAN Wi-Fi AP54, and the link will be established between your
cards and the BeWAN Wi-Fi AP54 (obviously, when you activated WEP encryption on the
BeWAN Wi-Fi AP54, the link to the cards was lost).
Manual key Automatically generated key
5. Click on Apply .
6. The BeWAN Wi-Fi AP54 will acknowledge this new parameter. Click on Continue .