Beurer BM 96 Cardio, Instructions For Use Manual

Page: 64 / 272

64
11. What if there are problems?
Problem /
Error Message
Possible cause Solution
Error Code It was not possible to correctly
record the pulse.
Please repeat the measurement.Make
sure that the cuff tube is properly
inserted and that you do not move or
talk.Re-insert the batteries if neces-
sary, or else replace them.
Error Code No measurement could be
taken.
Error Code The cuff is fastened too tightly
or loosely.
Error Code Errors occur during the meas-
urement.
Please repeat the measurement.Make
sure that the cuff tube is properly
inserted and that you do not move or
talk.Re-insert the batteries if neces-
sary, or else replace them.
Error Code The pump pressure is higher
than 300 mmHg.
Error Code There is a system error. If this error message appears, please
contact Customer Services
Error Code • The ECG signal is unstable or
too weak. No ECG signal found.
Repeat the measurement as per the
instructions in these Instructions for
use.
Error Code • Contact pressure on the skin
is too weak.
• The measurement was inter-
rupted.
Repeat the measurement as per the
instructions in these Instructions for
use.
The batteries are almost empty. Replace the batteries.
The device will not
switch on.
The batteries are flat. Replace the batteries.
The batteries have been inserted
incorrectly.
Re-insert the batteries, observing the
correct polarity (-/+).