Beurer BM 96 Cardio, Instructions For Use Manual

Page: 61 / 272

61
Displaying and deleting ECG measured values
Displaying
The device has two user memories. Each user memory can store up to 60* measurements. Once all
memory spaces in a user memory have been used, the oldest measurements are replaced by the
most recent.
You can access stored measurements on the device at any time. Proceed as follows:
• With the device switched off, press the START/STOP button . The last stored measured value in
the selected user memory is displayed.
To access the measured values in the second user memory, press M2 .
• To navigate between the individual measurements, press the function buttons / .
Deleting
• To delete the memory of the selected user, press the function button for 5 seconds.
• appears on the display. All the values in the selected user memory have now been deleted.
Transferring measurements
Transfer via Bluetooth ® low energy technology
It is also possible to transfer the measured values saved on the device to your smartphone using Bluetooth ®
low energy technology. You will need the “beurer HealthManager Pro” / “beurer HealthManager” app for
this. The apps are available free of charge on the Apple App Store and from Google Play.
When connecting for the first time, a randomly generated six-digit PIN code is displayed on the
device, and at the same time an input field appears on the smartphone in which you must enter
this six-digit PIN code. After successfully entering the code, the device will be connected to your
smartphone. If your smartphone has a protective cover, remove this to ensure that there is no in-
terference during the transfer.
* With 30-second measurement. Deviation possible in the event of a longer measurement duration.