8
Before you operate the ANTELOPE.SUIT for the first time,
you must charge the BOOSTER for at least 4 hours. To do
this, proceed as follows.
Connect the supplied USB charging cable to a USB mains adapter
(output: max. 5 V/ 2 A, not included in the scope of delivery) and
the BOOSTER. Alternatively, you can also charge the BOOSTER
via your computer/laptop. To do so, connect the USB charging
cable to the BOOSTER and the USB port of your computer/laptop.
The BOOSTER is exclusively intended to ensure and regulate the
electrical stimulation of the ANTELOPE.SUIT.
6.4 ANTELOPE.APP
The ANTELOPE.APP serves as an external control system for the
stimulation regulation of the ANTELOPE.PRODUCTS. Without
connecting the ANTELOPE.APP to the BOOSTER, it is not possible
to start the electrical stimulation. The following stimulation pro-
gramms are available via the ANTELOPE.APP:
Endurance
Strength
Massage
Frequency
40 Hz
85 Hz
60 Hz
Pulse width
400 µs
350 µs
220 µs
Pulse type
Constant
4 seconds
intervall
1.25 seconds
increase and
1.25 seconds
decrease in
intensity
6.5 ANTELOPE.ELECTRODE CONTACT SPRAY
ANTELOPE.ELECTRODE CONTACT SPRAY is a conductive liquid
which, can improve the conductivity between the electrodes and
the skin.
Application: Spray the electrodes with the spray. 1 - 2 sprays are
sufficient. Hold the bottle vertically and spray the electrodes with
approx. 15 cm distance between the spray head and the elec-
trode.
7. APPLICATION ANTELOPE ORIGIN
We recommend using the ANTELOPE.SUIT at least once to
max. twice a week for 20 minutes each time. Between the
training units, make sure you have enough time to
regenerate. Before, during and after training you should drink
enough water.
Start your training at a low intensity and slowly increase the
stimulation. Follow the instructions in this manual carefully.
7.1 Putting on the ANTELOPE.SUIT
1. Open the three zippers of the ANTELOPE.SHIRT (one on each
side and one in the middle).
2. Put the shirt on and make sure that the electrodes lie flat on
the skin without folds or creases. If necessary, the electrodes can
be moistened in advance with the ANTELOPE.ELECTRODE CON-
TACT SPRAY supplied.
3. Close zippers.
The electrodes must be placed directly on the skin. Heavy
body hair or very dry skin may interfere with stimulation.
Make sure that the electrodes are placed directly on the muscle
to be stimulated.
