12
10. WHAT TO DO IN CASE OF PROBLEMS
Problem
Possible
cause
Solution
Unpleasant
feeling during
stimulation
Dry skin
• Spray ANTELOPE.ELECTRODE CONTACT SPRAY directly onto the electrodes.
• Drink enough water before, during and after training.
• If necessary, start your training with a light warm-up without stimulation.
If the stimulation is not noticeable at an intensity of 25%, switch off the BOOSTER and apply the
ANTELOPE.ELECTRODE CONTACT SPRAY directly to the electrodes in the textile. Then start the
ANTELOPE.APP and make sure that all intensity levels are set to 0. Once this process is complete, start
using your ANTELOPE.SUIT again according to these instructions for use.
Intensity of
stimulation is too
high
• Reduce the intensity of the stimulation.
• Stop the stimulation.
Defective elec-
trode
Please contact our Customer Care Team.
Stimulation
is too weak/
no stimulation
noticeable
Dry skin
Spray the ANTELOPE.ELECTRODE CONTACT SPRAY directly onto the electrodes.
If the stimulation is not noticeable at an intensity of 25%, switch off the BOOSTER and apply the
ANTELOPE.ELECTRODE CONTACT SPRAY directly to the electrodes in the textile. Then restart the
ANTELOPE.APP and make sure that all intensity levels are set to 0. Once this process is complete,
start using your ANTELOPE.SUIT again according to these instructions for use.
Stimulation
intensity is too
low
Gradually increase the stimulation.
If the stimulation is not noticeable at an intensity of 25%, switch off the BOOSTER and apply the
ANTELOPE.ELECTRODE CONTACT SPRAY directly to the electrodes in the textile. Then restart the
ANTELOPE.APP and make sure that all intensity levels are set to 0. Once this process is complete, start
using your ANTELOPE.SUIT again according to these instructions for use.
Defective elec-
trode
Please contact our Customer Care Team.
