Beurer GL50 evo
31
Note
• If you have already saved measured values and you reset the date, the average values are calculated
as from the new period.
• “No saved values” indicates an empty memory for measured values. Press the ON/OFF button to
switch off the device.
6.1 Displaying individual values
The most recent measured value is displayed first, and the oldest last. The date and time are also
displayed on the monitor at the same time.
1
Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2
Rotate the scroll wheel until the arrow is pointing towards “All values”, then press the scroll
wheel to confirm.
• All values
• Average
• Settings
Back
MEMORY
MEMORY
3
You can now rotate the scroll wheel to navigate between the saved individual values.
4
You can cancel the process at any time. To do so, press and hold the scroll wheel or wait
until the device switches itself off automatically after 2 minutes.
6.2 Displaying average blood glucose values for marked values
You can display the average measured blood glucose value of the individual markings from the last
7, 14, 30 and 90 days.
1
Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2
Rotate the scroll wheel until the arrow is pointing towards “Average”, then press the scroll
wheel to confirm.
3
Use the scroll wheel to select the desired marking (
O
, , or ) for which you want to
display the average values.
Ø 7 days 234 mg/dL
O
Ø 14 days 156 mg/dL
Ø 30 days 107 mg/dL
Ø 90 days 98 mg/dL
Ø 7 days
13,0 mmol/L
O
Ø 14 days
8,7 mmol/L
Ø 30 days
5,9 mmol/L
Ø 90 days
5,4 mmol/L
4
Press the scroll wheel to display the respective quantity of
measured values in the markings.
7 days - 4 values
14 days - 10 values
30 days - 109 values
90 days - 407 values
