Beurer GL50 evo
25
To do this, proceed as follows:
1
Following the measurement, the display will briefly show the measured value and then the menu
in which you can mark the measured value. It is not possible to change the marking afterwards.
2
Select the desired marking using the scroll wheel.
•
O
“No marking”
“Before meal”
“After meal”
“General marking”
• Confirm the marking by pressing the scroll wheel.
3
The selected marking is now allocated to the measured value and saved to the memory.
5.5 Post-processing and disposal
1
Remove test strip
Remove the test strip from the device and carefully dispose of it in
accordance with the applicable regulations to avoid infecting others.
2
Remove the cap
Carefully remove the cap from the lancing device.
3
Stick protective disc on needle
Place the retained protective disc flat on a hard surface. Stick the
tip of the needle into the protective disc (image 1) so the needle is
covered (image 2).
Image 1
Image 2
