18
Beurer GL50 evo
5
Switching the beep on/off
On the blood glucose monitor, you can switch on the beep, switch off the beep or set a result
beep.
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards
“Settings”, then press the scroll wheel.
• All values
• Average
• Settings
Back
3. Rotate the scroll wheel until the arrow is pointing towards
“Beep on/off”, then press the scroll wheel.
• Bluetooth on/off
• NFC on/off
• Beep on/off
• Ketone on/off
4. Use the scroll wheel to select your desired setting (beep on,
beep off or result beep) and confirm by pressing the scroll
wheel.
• Beep on
✔
• Beep off
• Result beep
Back
Note
The result beep transmits the measurement as an acoustic beep signal.
Example: measured value 103
Start signal
Beep beep
Number 1
Short beep
Number 2
Long beep (for 0)
Number 3
3 x short beep
The beep signal is repeated 2 times and can be interrupted by rotating the scroll wheel.
6
Switching the ketone warning on/off
On the blood glucose monitor, you can switch a ketone warning on and off.
1. Switch on the blood glucose monitor by briefly pressing and
holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards
“Settings”, then press the scroll wheel.
• All values
• Average
• Settings
Back
3. Rotate the scroll wheel until the arrow is pointing towards
“Ketone on/off”, then press the scroll wheel.
• NFC on/off
• Beep on/off
• Ketone on/off
• Turn display