Bettis P/N 126858
Revision "F"
Page 15 of 15
SECTION 6.0 - MODIFICATIONS
6.1
M11 PUMP HANDLE REORIENTATION
6.1.1
Remove the four socket cap screws (20-110) from pump cover (20-20).
6.1.2
Lift the pump cover (20-20) up from manifold (20-10) far enough to turn the pump handle to
its new location.
NOTE: Before putting the pump cover back down on the manifold be sure that the pump cover to
manifold o-ring is still seated in it’s seal groove located in the pump cover.
6.1.3
Install the pump cover back down on top of the manifold.
6.1.4
Install the four socket cap screws (20-110) through the pump cover and into the manifold.
6.1.5
Tighten the socket cap screws (20-110) tight plus a quarter turn.
ECN
DATE
REV
BY *
DATE
19291
26 Oct 06
C
COMPILED
L.Ramirez
18 April 2007
19330
17 Nov 06
D
CHECKED
C. Ross
18 April 2007
19562
18 April 2007
E
APPROVED
D. McGee
18 April 2007
* Signatures on file Bettis Actuator & Controls, Waller, Texas
